Pintuck Foot - Low Shank (Item #PTF)

Use this foot when making pintucks with a twin needle. It spaces the tucks perfectly and gives them room under the foot to get out the back as you stitich. You can see out twin needles here. Use a 1.6/ 70 or 1.6/80 twin needle with the nine groove foot, and the 2.5/80 with the five groove foot.

Overcast Foot - Low Shank (Item #OCF)

Use this foot to finish raw edges with a zig zag stitch without the edge rolling and puckering. The perfect solution when you don't have a serger, or don't want to use the serger for a small job.

Roller Foot - Low Shank (Item #TRF)

Use the roller foot when sewing textured fabrics like leather, vinyl, velvet, velveteen, corduroy and suede. Prevents fabric from tugging and pulling against the foot as it rolls along. The metal roller will not leave imprints on fabrics.

Fringe Foot - Low Shank (Item #FF)

This foot has a raised bar down its center. Stitching over this bar with a zig zag or ladder stitich creates thread loops. This foot is also used for tailor tacking by stitiching in place then clipping the threads.

Insert up to five decorative cords through the holes at center of foot. Then, use your zigzag stitch to sew the cording in place. It's ideal for threads like button hole twist, Pearl Crown Rayon or embroidery floss. Tip: Tape the cords to your fabric to hold them in place before stitching them down.

Use this open toe foot anytime you want to see exactly what is happening in front of the needle. See decorative stitches and satin stitches with ease. The underside of the foot is grooved so stitches pass easily beneath the foot especially helpful with applique. You can also use it to sew buttons on by machine, the open toe makes it easy to see the holes of the buttons.

Invisible Zipper Foot - All Shanks Included (Item #IZF)

Install invisible zippers in a snap with this foot. It's inexpensive and it's great! It's the invisible zipper foot that fits most sewing machines. It comes with four blue adaptors to fit low, high, slant and low front mounting machines - so you're coved. Instructions are included. And just so you know YKK is the company that also produces invisible zippers - so if they don't know the inside secrets on how to install them, no one does!

Use this smooth, Teflon-coated foot when sewing textured fabrics like leather, vinyl, and suede. Prevents fabric from tugging and pulling against the foot.

The Ruffler Foot - Low Shank (Item #TRF)

The Ruffler Foot is a real time saver when making anything with ruffles or pleats. Gather or pleat one fabric layer and attach it to one or more flat layers in one operation. Can be adjusted to make repeating tucks and narrow pleats. Includes instructions. The Learning and Using Your Ruffler book is "the book" to have to use this foot to it's fullest. Just so you know it's not going to be reprinted - if you want one now is the time to get it.

We have a few of these rufflers on sale in the bargain basement - check there before buying here, you save $10.00!

The Flower Stitch Foot - Low Shank (Item #FSF) See a sample here.

Attach to your presser bar and needle clamp to make circles, flowers, and eyelets that match up perfectly, without using a hoop! The foam ring on the bottom of the foot grips the fabric to allow even stitching around the eyelet. Expand flower designs by adjusting the needle position and/or using different decorative zigzag stitches. You can use a regular or twin needle for different effects. Creates circles up to 7/8" diameter.

You can see our Sewing Machine Needles here.

The Bear Club	Free Email News	New Products	Home	Catalogue Index	E Mail Us	Bargain Basement	Get Inspired